Fiber + Wireless Hybrid Networking: 5 GHz Outdoor High-Speed PTP/PTMP Wireless Bridge PCBA
A high-performance 5 GHz 2×2 outdoor wireless AP/bridge platform based on 802.11ac Wave 2, built on the Atheros QCA9558 + QCA9886 chipset. It delivers up to 27 dBm EIRP transmit power, provides three RP‑SMA antenna connectors, integrates a Gigabit SFP fiber interface plus a Gigabit Ethernet port, and supports Passive PoE powering. With industrial-grade protection and flexible deployment, it is ideal for PTP/PTMP wireless backhaul, outdoor base stations, and enterprise outdoor WLAN deployments.
Key Product Advantages
High-Speed Wireless Performance
802.11ac Wave 2 with 2×2 MIMO, up to 867 Mbps PHY rate, and high transmit power up to 27 dBm EIRP.
Rich Interface Design
1× Gigabit Ethernet + 1× Gigabit SFP fiber port for copper/fiber dual-media access and flexible networking.
Industrial-Grade Reliability
IP65 ingress protection, ultra-wide operating range from -40°C to +70°C, and wide-input Passive PoE for harsh outdoor environments.
Core Hardware Specifications
| Parameter Category |
Specification Details |
| SoC |
Atheros QCA9558，720 MHz MIPS 74Kc |
| Memory |
256 MB DDR2 RAM |
| Storage |
16 MB Flash |
| Wi‑Fi Chipset |
Atheros QCA9886 (5GHz 802.11a/n/ac Wave 2) |
| Wireless Standards |
IEEE 802.11a/n/ac, 2×2 MIMO, 2 spatial streams |
| Operating Frequencies |
5.150–5.875 GHz (adjusted per regional regulations) |
| Transmit Power |
27 dBm (EIRP; actual output complies with local regulations) |
| Antenna Connectors |
3× RP‑SMA (2Tx/1Rx or 1Tx/2Rx) |
| Wired Interfaces |
1× Gigabit Ethernet (10/100/1000 Mbps RJ45) + 1× Gigabit SFP |
| PoE Support |
Passive PoE input (8–30 V DC), PoE output (24 V DC) |
| LED Indicators |
Power, wireless, Ethernet, and SFP status LEDs |
Wireless Performance
| Parameter |
Specification Details |
| Channel Bandwidth |
20/40/80 MHz |
| Modulation |
BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
| Max PHY Rate |
867 Mbps (80 MHz channel, 802.11ac) |
| Receiver Sensitivity |
-97 dBm (6Mbps) ~ -65 dBm (867Mbps) |
| Wireless Security |
WEP, WPA/WPA2-PSK, WPA2-Enterprise (802.1X), WPA3 |
| Wireless Optimization |
Nstreme, NV2, CAPsMAN, Virtual AP, WDS, wireless client |
Physical & Environmental
| Parameter Category |
Specification Details |
| Dimensions |
105 x 110 x 38 mm |
| Weight |
116 g |
| Operating Temperature |
-40°C to +70°C |
| Operating Humidity |
0–100% (non-condensing) |
| Supply Voltage |
8–30 V DC (Passive PoE), recommended 24 V DC |
| Power Consumption |
Approx. 6 W (typical load), max 8 W |
Typical Application Scenarios
- 5 GHz outdoor high-speed PTP/PTMP wireless bridging: 867 Mbps meets high-throughput backhaul requirements
- Fiber + wireless hybrid networking: SFP uplink to fiber with wireless extension to expand coverage
- Small/medium outdoor base stations supporting multiple Virtual APs and CAPsMAN centralized management
- Industrial wireless networking: wide temperature range plus IP65 protection for hot/cold/humid outdoor environments
- ISP broadband access deployments: cost-effective 5 GHz high-bandwidth outdoor coverage
- Wireless backhaul for remote surveillance: suitable for high-bandwidth terminals such as 4K cameras
