6GHz Generation 1

LigoPTP RapidFire is a high-performance wireless bridge designed for long-distance heavy-duty point-to-point applications. It delivers exceptional 700Mbps speed thanks to a powerful hardware platform, supporting modulation up to 256-QAM and 30dBm output power, performing excellently even in dense and noisy environments. The proprietary W-Jet protocol is engineered for high-capacity PTP scenarios, minimizing interference and stabilizing latency even over long-distance links.

Superior Capacity

RapidFire provides an extremely high 700Mbps throughput through its unique and powerful RF design, supporting up to 256-QAM modulation and 30dBm output power. Our proprietary W-Jet V protocol is designed for high-performance PTP applications, minimizing interference even over long distances and stabilizing latency at 2–4 ms.

Professional Design

In addition to optimal performance, LigoWave focuses on delivering flexibility and ease of use in the RapidFire series. The robust mounting bracket enables fast link deployment and ensures survivability under high wind loads. The integrated antenna offers a 45° rotation option for improved installation flexibility, which is especially advantageous in noisy spectrum areas. The GORE© membrane vent quickly equalizes pressure in the IP-67 rated cast-aluminum enclosure to prevent condensation and ensure sealing performance. A detachable handle simplifies transporting the unit to towers and over rough terrain. The newly designed RGB LED indicates various device statuses and signal levels (in 1dBm steps) during antenna alignment.

Powerful All-In-One Hardware Platform

LigoWave RapidFire features a brand-new 1.2GHz CPU dedicated to data processing and high packet transmission (200,000 pps), delivering powerful performance. The unit is equipped with two Gigabit Ethernet ports, one with PoE pass-through, enabling 1+1 (failover) or repeater links, making it ideal for high-security video surveillance applications. RapidFire integrates IEC-standard surge and ESD protection, meeting Level 4 requirements.

Wireless Configuration Interface

The internal 2.4GHz radio allows access to the Rapidfire GUI via wireless connection from any WiFi-enabled device. This feature speeds up link installation and eases troubleshooting in hard-to-reach locations. Tests confirm easy access at a distance of 20 meters (65 ft), even when mounted on top of a 10-story building!

Infinity Controller

The Infinity Controller is a wireless network management platform currently available for the NFT series, and soon for the LigoDLB and LigoPTP series. The controller allows users to deploy, manage, and scale NFT Wi-Fi networks using automatic device onboarding, predefined network scenarios, and other features. The Infinity Controller for DLB and PTP series will enable users to simplify how they build, scale, and maintain wireless networks.

Powerful Operating System

The LigoPTP operating system ensures easy and fast deployment of point-to-point links with stable, high-speed performance. The intuitive and responsive user interface adapts layout to screen size. Essential tools including Setup Wizard, Link Test, Antenna Alignment, Spectrum Analyzer, and Site Survey make setup and troubleshooting more efficient. Automatic mechanisms such as Auto Channel and Auto Transmit Power Control optimize links for best performance even in high-interference areas.

Easy Pre-Configuration

The diagrams below show multiple options for pre-configuring LigoPTP RapidFire devices. Units can be connected to each other using wired or wireless links. End-user devices can also connect to the master unit’s Ethernet port using the 2.4GHz access radio or via a wired connection. LigoPTP RapidFire devices can also be discovered using bonjour and SSDP protocols.

Wireless Protocol	W-Jet V
Radio Mode	2×2 MIMO
Frequency Range	5.900–6.400GHz
Channel Width	5, 10, 14, 15, 20, 30, 40, 60, 80MHz
Modulation Scheme	OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data Rate @80MHz	866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
Duplex Scheme	TDD (Time Division Duplex)
Error Correction	Baseband Coding, LDPC (Low-Density Parity-Check)
Auto TPC	Supported

Antenna

LigoPTP 6-N RapidFire

2× N-Type Connectors

Wired

First Interface	10/100/1000 Base-T with PoE Input (RJ45)
Second Interface	10/100/1000 Base-T with PoE Output (RJ45)

Physical Dimensions (without mount)

LigoPTP 6-N RapidFire	Length 399 mm (15.7 in), Width 174 mm (6.8 in), Height 47 mm (1.8 in)
Mount Length to Pole	124 mm (4.8 in)

Weight with mount:

LigoPTP 6-N RapidFire

2.9 kg (6.3 lbs)

Power

Power Input, Voltage	PoE 802.3at, Isolated 42–57VDC
Max Power Consumption	8.6W
Power Output, Voltage	PoE 802.3af, 48VDC, max 12.95W
PoE Injector and AC/DC Adapter Included

Environment

Operating Temperature	–40°C (–40°F) ~ +65°C (+149°F)
Humidity	0~90% (non-condensing)

Software Features

• Fast Link Setup Wizard
• Master Centralized Control: A) Common wireless link parameters; B) Individual slave parameters
• Intelligent Auto Channel Selection
• Advanced Data Security
• QoS with Hardware Acceleration
• Spectrum Analyzer
• Wireless Signal and Device Status Indication on RGB LED
• Dual Firmware Images

Management

Dedicated 2.4GHz radio for management

System Monitoring	STP/I SNMP (V3) TOKIO, GUI/HTTP(S), Shell/SSH, WNMS
System Configuration	GUI/HTTP(S), WNMS

Regulatory

Certifications

FCC / IC / CE

Antenna Specifications

Frequency Range	5.85–6.45GHz
Gain	25dBi
Cross-Pol Isolation	27dB
VSWR	<1.4
Azimuth Beamwidth (H-pol)	8°
Azimuth Beamwidth (V-pol)	8°
Elevation Beamwidth	8°